How To Apply Window Tint Like A Pro

Apr 18

Window tinting is a great way to improve the look of your car and protect your interior from the sun. If you have never applied window tint before, it can seem like a daunting task.

However, with the right tools and instructions, you can do it yourself! In this article, we will show you how to apply window tint like a pro. We will provide step-by-step instructions and tips for success. So what are you waiting for?

What Is Window Tinting?

Window tinting is the process of applying a thin film to the glass of your car windows. This film can reduce glare, block UV rays, and improve the overall look of your vehicle.

There are many different types of window tint available on the market, so it is important to choose one that is right for you. Once you have selected the perfect window tint, follow these steps to apply it like a pro!

Steps For Applying Window Tint

Step One: Clean The Glass Surface

The first step in any successful window tinting job is to clean the glass surface. This will help ensure that the tint adheres properly and lasts for years to come.

Use a glass cleaner and lint-free cloth to remove any dirt, dust, or other debris from the window. Be sure to clean the entire surface, including the edges and corners.

Step Two: Measure The Window

The next step is to measure the window. This will help you determine how much tint you need to purchase.

To measure the window, use a tape measure to find the width and height of the glass surface. Once you have these measurements, multiply them together to get the total square footage.

For example, if your window is 12 inches wide and 18 inches tall, your total square footage would be 216 square inches.

Step Three: Cut The Tint Film

Now it's time to cut the tint film. Most kits come with pre-cut pieces that are sized for common window sizes, but you may need to trim the film to fit your particular window.

To do this, lay the tint film over the glass surface and use a razor blade or utility knife to trim off any excess. Be sure to cut away from yourself and go slowly to avoid mistakes.

Step Four: Remove The Liner

Once you have the tint film cut to size, it's time to remove the liner. This is a thin piece of plastic that protects the adhesive side of the film.

To remove it, simply peel it away from one corner of the tint film. Take care not to touch the sticky side of the film with your fingers as this will leave fingerprints and cause bubbling.

Step Five: Spray The Glass With Soap Solution

The next step is to spray the glass surface with a soap solution. This will help the tint film to stick to the glass and avoid bubbles.

Make sure to cover the entire surface of the glass, then use a squeegee to remove any excess solution.

Step Six: Apply The Tint Film To The Glass

Now it's time to apply the tint film to the glass. Starting at one corner, slowly peel away the liner and apply the sticky side of the film to the glass.

Use a squeegee to smooth out any bubbles as you go. Once the entire piece of tint film is in place, trim off any excess with a razor blade or utility knife.

Step Seven: Remove The Outer Layer Of The Tint Film

The final step is to remove the outer layer of the tint film. This can be done by peeling it away from one corner or using a razor blade to carefully cut it off.

And that's it! You've successfully applied window tint like a pro.

Visit Cutting Edge Window Tinting Now!

Conclusion:

We would like to conclude by saying that window tinting is not a difficult task if done correctly. Be sure to follow the instructions provided in this blog post and you'll be well on your way to having perfectly tinted windows.

Phone +18474292479
Address	408 Brook St, Elgin, IL 60120